For a more accurate costing simply complete the next 2 steps. You can use our downloadable planner to help you plan out your garden and take the exact measurements before proceeding.

Provide the number and lengths of SowGreen® rolls you need...

SowGreen® is supplied in 2m widths and roll lengths up to 20m. Work out the best way to position the rolls to minimise the number of joints. This simply means deciding whether to lay the rolls from top to bottom or left to right across the garden. Never lay the rolls in different directions, as this will detract from the overall finish.

Provide the total length of the seams that will join the rolls...

Joints

Once you have determined your carpet layout you can calculate how many joints you will have. The jointing operation is very simple and we provide the adhesive, jointing tape and applicator to do this.

Skip Bags:

If required we can provide skip bags for easy removal of your old turf. We would recommend that you remove your existing turf to a depth of 20mm. Use the lawn area and multiply it by 50 to calculate the overall weight of the waste in kg. (e.g. a 37 sq.m. lawn area x 50kg would give 1850kg of waste. Therefore two 1000kg skip bags would be required). Please note cost is for bags only and you need to allow a collection charge for each bag. Details can be found at www.hippowaste.co.uk.

Fitting:

Although installation of of SowGreen® is very straightforward we do offer an installation service. If you choose this option we will assume that there is easy access to the garden through a minimum 800mm wide gate.

We will provide an amount of sharp sand for taking out minor undulations but the carpet will be laid to existing falls. We shall assume that the SowGreen® is to be laid in the same configuration as the existing lawn. The cost for this service is calculated per square metre of lawn area, however there is a minimum charge.